mirror of https://github.com/maduce/fosscad-repo.git synced 2024-09-20 08:58:25 -04:00

History

ma duce 4d51e9c98d First push for new repo, migrating older files to new repo.		2013-08-06 18:31:03 -05:00
..
DXF	First push for new repo, migrating older files to new repo.	2013-08-06 18:31:03 -05:00
Renders	First push for new repo, migrating older files to new repo.	2013-08-06 18:31:03 -05:00
SLDPRT	First push for new repo, migrating older files to new repo.	2013-08-06 18:31:03 -05:00
STEP	First push for new repo, migrating older files to new repo.	2013-08-06 18:31:03 -05:00
STL	First push for new repo, migrating older files to new repo.	2013-08-06 18:31:03 -05:00
README.md	First push for new repo, migrating older files to new repo.	2013-08-06 18:31:03 -05:00

README.md

Trantor Revolver 224

Version

v1.2

Description

This system was designed as a research tool. If fabricated, be aware of local laws. For additional assembly information, see enclosed picture files. 5 frame pins are required, as well as glue.

Formats included are STL, DXF, STEP, and SLDPRT.

Notes

Simulations indicate that .22 Short may function, but more than one use of .22 LR may cause deformation. For more information, see "Simulated Testing of a 3D Printed Revolver Cylinder" by J LaRocco, 2013 (http://www.peerevaluation.org/read/libraryID:29812)

Disclaimer:

For US legal requirements, a piece of metal can be epoxied into the space above the trigger (within the frame), and beneath the mainspring. Also be aware of individual state laws. Likewise, components can be made out of metal instead of polymers. A nail (perhaps an 8d/10 gauge or 10d/9 gauge one) can be inserted in the tube above the system for use as a firing pin. Again, no warranty is issued. All usage is done at individual risk.