fosscad/Rifles/Madsen_M-50-Magazine_Extension_Long-n0mad

N0mad's madsen m50 extra long magazine extension

Author

n0mad

Version

8.0

License

Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).

Release Date

2018/09/18

Description

This is a two part magazine extension for madsen m50 magazines.

Test Record

This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 49 rounds (+17).

Printing

• All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
• No support material needed
• Print both pieces on their backs to preven the need of infill.
• Print barrel standing on it rear end.

Finishing

• Aquire six bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
• Drill out holes to fit bolt size.
• A longer magazine spring will be required. This extension should work with extended glock springs.
• I used the one found here. https://taccom3g.com/product/taccom-spring-kits/ The bolts and chicago screws will also work.
• The existing follower will need to be removed and affixed the the glock spring.
• Clamp around magazine bolt down, no floor plate needed.

DISCLAIMER

Use this information at your own risk and responsibility.